Rock and Roll fo your arm

 

Sterling silver ” Rock and Roll ” cuff bracelet

OLYMPUS DIGITAL CAMERA OLYMPUS DIGITAL CAMERA  OLYMPUS DIGITAL CAMERA OLYMPUS DIGITAL CAMERA OLYMPUS DIGITAL CAMERA

I used a 20 gauge 6 inch by 1 1/4 inch strip of sterling silver for the base and 18 gauge sterling silver for the guitars and the star. The shapes were cut out with a 6 inch jewelry saw and 1/0 saw blades. Personally I prefer the german saws and saw blades as I found the quality to be outstanding , but I might be biased because I am german.

I used a template to draw the guitars right on the metal and then sawed them out .

OLYMPUS DIGITAL CAMERA OLYMPUS DIGITAL CAMERA OLYMPUS DIGITAL CAMERA OLYMPUS DIGITAL CAMERA 

After sawing out the shapes they were soldered via sweat soldering onto the base strip then quenched in water and after that put in the Pickle pot to clean the metal from the black oxidation.

OLYMPUS DIGITAL CAMERA OLYMPUS DIGITAL CAMERA

I used an abrasive wheel to quickly file and round the edges – Cratex Medium wheels work very well for that . I like to use my polisher with the wheels because its fast and if you run a business you need to be fast but also have a high quality . I cut down my filing time from about 20 minutes to about 30 seconds .

OLYMPUS DIGITAL CAMERA OLYMPUS DIGITAL CAMERA

When you are finished with filing you edges you can add texture . I have several chasing tools made from hardened steel but I also use screw drivers and other things.

OLYMPUS DIGITAL CAMERA OLYMPUS DIGITAL CAMERA

Now comes the bending part . I am not very strong with my hands and that is the reason why I am using 20 gauge for my base plate, if I use anything thicker than that I would not be able to bend it anymore and would have to use the metal press.

For shaping my bracelets I prefer to use a wooden mandrel and a nylon hammer they are soft and will not leave any marks in your metal

OLYMPUS DIGITAL CAMERA OLYMPUS DIGITAL CAMERA OLYMPUS DIGITAL CAMERA OLYMPUS DIGITAL CAMERA

as you can see after pounding and bending you get a nice oval shape . There are also round mandrels if you prefer a round look . I run the bracelet through my polisher one time to clean the metal and prepare for the liver of sulfur patina . The cleaner the metal the nicer and more consistent your patina gets.

OLYMPUS DIGITAL CAMERA OLYMPUS DIGITAL CAMERA OLYMPUS DIGITAL CAMERA OLYMPUS DIGITAL CAMERA

Liver of sulfur gives you a nice dark gray patina. A word of caution , liver of sulfur stinks like rotten eggs so try to do it in a well ventilated area or your hair and clothing will smell too. Even though my husband always knows when I play around with it 😉

OLYMPUS DIGITAL CAMERA OLYMPUS DIGITAL CAMERA

After the patina I polished the bracelet again an only left the darkness in the pattern and texture

OLYMPUS DIGITAL CAMERA OLYMPUS DIGITAL CAMERA

If you liked the post , maybe leave a comment and let me know 😉

#bracelet-tutorial, #dragonfly-bracelet, #guitar, #metal, #metal-art, #metal-shop, #metalsmithing, #metalwork, #metalworking, #nicilaskin, #tutorial