follow your dreams

sterling silver guitar ring

sterling silver guitar ring
following my dreams was scary and still is . 4 years ago I had to quit my job as a well paid nurse ( injured my back on the job – did not get workers comb ) The only thing I had was my hobby – metal smithing. 4 years later I am my own boss now and make what I love , even though the ups and down of selling your own creations or following your dream is scary as shit and sometimes you don’t know how to pay rent its still somehow worth it 🙂

enough with the story – here is what I do

enough with the story - here is what I do
starting out with a sheet of metal – 18 gauge sterling ( 1mm thick)

i usually draw directly on the metal

i usually draw directly on the metal

my trusted jewelry saw

my trusted jewelry saw
I have a 6 inch saw and a inch saw but mostly use the 6 inch ( distance between sawblade and frame ) the saw blade itself is about 0.5mm thick

cut out guitar

cut out guitar

number 2 halfround file

number 2 halfround file
I filed all the edges smooth

punching a hole

punching a hole
I use hole punch pliers for most of the holes I need but I also have a really small drill press for when the punch needs to be bigger

added some texture with some older steel punches

added some texture with some older steel punches

I try to never forget to “mark” the stuff I make

I try to never forget to "mark" the stuff I make
maybe one day in 500 years someone will find one of mine and I will be in some antique jewelry book . lol

bending the ring until the ends meet

bending the ring until the ends meet

now comes the fun part

now comes the fun part
fluxing the joint and adding some wire solder

heating the ring with my hydroflux welder

heating the ring with my hydroflux welder
My husband got me a really really nice toy for my birthday/christmas and any other holiday , its portable and pretty safe to use unlike the torches with oxygen and acetylene

after soldering the ends together

after soldering the ends together
oxidation happens during heating , you an clean it up with putting the metal in a so called “Pickle solution”

after the “pickle bath”

after the "pickle bath"

ring mandrel and ring

ring mandrel and ring
I used a nylon hammer to hammer out the shape to make it nice and round and to work harden the ring

formed ring

formed ring

cleaning it with my flex shaft

cleaning it with my flex shaft
a flexshaft is basically a dremel with a flexible hose

added patina

added patina
liver of sulfur was used – stinks like rotten eggs ( or bad doggie farts ) but leaves a nice dark/grey patina

took some steel wool and polished the surface a bit

took some steel wool and polished the surface a bit

done 🙂

done :)

here is another angle

here is another angle
hope you guys liked it and if you want you can have a look at my shop

#art, #handmade-jewelry, #jewelry-tutorials, #metal, #metal-tutorials, #metalsmithing, #metalwork, #nicilaskin, #tutorials